Telemecanique Sensors XS530B1PBM12 Proximity Sensor

Product Description

The TELEMECANIQUE SENSORS XS530B1PBM12 is a shielded cylindrical inductive proximity sensor rated for 12 to 24 volts DC operation. It detects ferrous and non-ferrous metal targets within a 10 mm (0.39 inches) sensing range and outputs a normally closed (NC) PNP signal across 3 wires at frequencies up to 1,000 Hz. The M30 threaded brass housing measures 55 mm (approximately 2.17 inches) in overall length and carries an IP67 and IP69K ingress protection rating, making it suitable for wash-down and high-pressure cleaning environments. Licensed electricians and industrial maintenance technicians install this sensor in machine control and automation panels.

The XS530B1PBM12 is designed for use in industrial automation, conveyor systems, machine tooling, and process control applications where reliable metal target detection is required. The four-pin M12 connector allows for quick field wiring or pre-made cable assembly connections. Its M30x1.5 threaded body fits standard sensor mounting brackets and through-hole panel installations common in both light manufacturing and heavy industrial settings. The sensor operates across a temperature range of -13 degrees F to 158 degrees F, supporting indoor and outdoor industrial deployments.

Key Features

• 10 mm detection distance with shielded cylindrical M30 body for flush panel mounting
• PNP normally closed (NC) output with 3-wire configuration and 200 mA maximum load capacity
• IP67 and IP69K rated brass housing for wash-down and high-pressure cleaning environments
• 1,000 Hz response frequency suitable for high-speed target detection applications
• Shock-resistant and vibration-resistant construction for demanding machine environments
• CE, CSA, UL listed and RoHS compliant; meets IEC 60068-2-27, IEC 60068-2-6, IEC 60529, and DIN 40050 standards

Compatibility

Designed as an OEM-style replacement or direct installation inductive proximity sensor for industrial automation systems requiring an M30 shielded cylindrical sensor with a four-pin M12 connector, PNP NC output, and 12 to 24 volt DC supply.

Installation Notes

Installation should be performed by a qualified electrician or instrumentation technician in accordance with applicable NEC guidelines and the machine manufacturer's wiring documentation. Disconnect and lock out all power to the control circuit before wiring or replacing the sensor. The M12 connector must be fully seated and locked to maintain the IP67 and IP69K ingress protection rating. Do not exceed the 200 mA output load capacity or the 24-volt DC maximum supply voltage.