Telemecanique Sensors XS506B1PAM12 Proximity Sensor

Product Description

The TELEMECANIQUE SENSORS XS506B1PAM12 is a shielded cylindrical inductive proximity sensor designed for detecting metallic targets in industrial automation and control applications. Built with an M6x1 threaded stainless steel housing, it provides a 1.5 mm nominal detection distance and operates on 12 to 24 volts DC. The output is PNP, normally open (NO), with a three-wire configuration and a four-pin M12 connector. With a response frequency of 5,000 Hz, this sensor suits high-speed detection tasks. Licensed electricians and automation technicians are the primary installers for this type of device in machine and process control environments.

This sensor is suited for use in residential and light commercial machine control panels, conveyor systems, assembly lines, and automated production equipment where precise, reliable metal target detection is required. Its compact M6.5 sensor head fits into tight mounting locations. The IP67 ingress protection rating makes it appropriate for wash-down and high-moisture environments. Its shock-resistant and vibration-resistant construction supports use in high-cycle industrial machinery where mechanical stress is constant.

Key Features

• 1.5 mm nominal detection distance for precise short-range metallic target sensing
• PNP normally open (NO) output with three-wire configuration
• Four-pin M12 connector for quick, standardized field wiring
• IP67 ingress protection rating — suitable for wash-down and dusty environments
• 5,000 Hz response frequency supports high-speed cycle detection
• Stainless steel housing with shock-resistant and vibration-resistant construction
• Certified to CE, CSA, UL, and RoHS; compliant with IEC 60068-2-27, IEC 60068-2-6, and IEC 60529

Compatibility

Designed as an OEM-style replacement or direct-fit inductive proximity sensor for industrial automation equipment using M6x1 threaded cylindrical shielded sensors with four-pin M12 connectors and PNP NO output configurations.

Installation Notes

Installation should be performed by a qualified electrician or automation technician. De-energize and lock out the machine or panel circuit before mounting or wiring the sensor. The M12 connector must be fully seated and locked to maintain the IP67 rating. Verify supply voltage is within the 12 to 24 volt DC operating range before applying power.