Tb Woods TB-10H Sure-flex Plus Sleeve Coupling Insert Size 10

Product Description

The TB WOODS TB-10H is a Size 10 Sure-Flex Plus one-piece sleeve coupling insert designed to join two compatible coupling flanges and complete a flexible sleeve coupling system. Constructed from Hytrel, this solid one-piece insert delivers a 4-way flexing action that absorbs shock loads, vibration, and end float while accommodating angular, axial, and parallel misalignment. It carries a rated torque of 11,350 in-lb and supports speeds up to 3,600 RPM. The insert measures 3-7/16 inches wide with an outside diameter of 7-1/16 inches and weighs 2.9 pounds. Mechanical contractors and industrial maintenance technicians install these inserts in power transmission applications across a wide range of equipment.

The TB-10H is suited for use in industrial and commercial power transmission systems where flexible coupling is required between driver and driven equipment. Rated at 18 hp at 100 RPM and capable of 630 hp at 3,500 RPM, it handles a broad horsepower range. It accommodates parallel misalignment up to 0.02 inches and angular misalignment up to 0.25 degrees. The operating temperature range spans -65 degrees F to 250 degrees F, making it appropriate for demanding environments including pump rooms, fan and blower assemblies, compressor skids, mixer drives, and conveyor systems.

Key Features

• One-piece solid Hytrel construction for consistent torque transmission and durability
• 4-way flexing action absorbs shock, vibration, misalignment, and end float simultaneously
• Accommodates angular, axial, and parallel misalignment in a single insert
• Rated torque of 11,350 in-lb with maximum speed of 3,600 RPM
• Wide temperature range: -65 degrees F to 250 degrees F
• Manufactured in the USA (subject to change)

Compatibility

Designed for use with Size 10 Sure-Flex Plus compatible coupling flanges. This insert completes a sleeve coupling system and is intended for H-type sleeve insert applications where one-piece solid construction is appropriate. Compatible drive equipment includes compressors, conveyors, electric motors, fans, blowers, mixers, and pumps.

Installation Notes

Installation is performed by qualified millwrights or industrial maintenance technicians. De-energize and lock out all power to the drive system before handling coupling components. Verify shaft alignment is within the published misalignment tolerances before seating the insert. Do not force or impact the Hytrel insert during installation, as deformation can affect torque capacity and service life.

Technical Specifications

• Coupling Size: 10
• Rated Torque: 11,350 in-lb
• Maximum Speed: 3,600 RPM
• Horsepower at 100 RPM: 18 hp
• Horsepower at Speed: 209 hp at 1,160 RPM; 315 hp at 1,750 RPM; 630 hp at 3,500 RPM
• Torsional Stiffness: 100,000 in-lb/rad
• Parallel Misalignment: 0.02 inches
• Angular Misalignment: 0.25 degrees
• Outside Diameter: 7-1/16 inches
• Insert Width: 3-7/16 inches
• Weight: 2.9 pounds
• Insert Material: Hytrel
• Insert Construction: One Piece - Solid
• Misalignment Types: Angular, Axial, Parallel
• Minimum Operating Temperature: -65 degrees F
• Maximum Operating Temperature: 250 degrees F
• System of Measurement: Inch
• Country of Origin: USA (subject to change)
• UNSPSC: 31163003

Standard Information

• Brand: TB WOODS
• Manufacturer Part Number: TB-10H