Tane Alarm pb-52tcwh Pushbutton Switch 110V Ac White

Product Description

The TANE ALARM pb-52tcwh is a pushbutton switch rated for 110 volts AC or 100 volts DC operation at up to 0.5 amperes and 10 watts. It is designed for use in low-current switching applications common to alarm, access control, and building automation systems. The white finish suits standard residential and light commercial wall installations. Electricians and low-voltage alarm technicians are the primary trades that specify and install this switch. Its compact form factor and straightforward wiring terminals make it a practical choice for door chime, entry alert, and similar momentary-contact circuit applications.

This pushbutton switch is suited for residential and light commercial installations where a momentary or maintained contact is needed in a low-power circuit. Typical applications include door chime circuits, alarm panel triggers, access control entry points, and annunciator inputs. The white finish integrates cleanly with standard wall plates and device covers in office, residential, and institutional environments. No specific compatible model families were stated in the product data.

Key Features

• Dual voltage rating: 110 volts AC or 100 volts DC for flexible circuit compatibility
• 0.5 ampere current rating suitable for low-current alarm and control circuits
• 10 watt maximum load rating
• White finish for clean integration with standard wall plates
• Compact pushbutton design for momentary or low-power switching applications

Compatibility

Designed as a general-purpose pushbutton switch for low-voltage and line-voltage alarm, access control, and building automation circuits requiring 110 volts AC or 100 volts DC switching at or below 0.5 amperes.

Installation Notes

Installation should be performed by a licensed electrician or qualified low-voltage alarm technician in accordance with applicable NEC requirements. De-energize the circuit completely before making or breaking any wiring connections. Verify that the connected load does not exceed the 0.5 ampere and 10 watt ratings before energizing. Secure all wiring terminations and confirm proper fit within the wall box before closing up the installation.