System Sensor SS-CO Addressable Co Detector

Product Description

The SYSTEM SENSOR SS-CO is an addressable carbon monoxide detector designed for integration into commercial and residential fire alarm and life safety systems. The unit ships without a base, making it a suitable add-on for installations where a compatible detector base is already in place. As an addressable device, the SS-CO communicates discrete point identification back to the fire alarm control panel, allowing the system to pinpoint the exact detector location during an alarm event. Licensed fire alarm technicians and low-voltage system installers are the typical professionals who specify and install this device.

The SS-CO is applied in addressable fire alarm system installations where carbon monoxide monitoring is required at individual detection points. It is suited for commercial buildings, schools, healthcare facilities, and multi-family residential projects that demand addressable life safety coverage. Because the detector ships without a base, it is most commonly deployed as a replacement head or as an expansion device on an existing addressable loop where compatible bases are already mounted.

Key Features

• Addressable design enables individual point identification at the fire alarm control panel
• Carbon monoxide detection provides dedicated CO life safety coverage
• Ships without base, supporting add-on and replacement installations where bases are in place
• Sold as a single unit, suitable for targeted system expansion

Compatibility

Designed as an addressable CO detector head for use with compatible addressable fire alarm control panels and detector bases; no specific compatible models or base part numbers were provided in the available product data.

Installation Notes

Installation must be performed by a licensed fire alarm technician in accordance with NFPA 72 and all applicable local codes. Before servicing or replacing any addressable device on a loop, disable the affected zone or panel circuit per the control panel manufacturer's procedures. Do not install the detector head without a compatible addressable base in place. After installation, perform a full system functional test to verify correct point mapping and alarm response at the control panel.