Sumitomo 5VHY419 Solid Carbide Jobber Drill 1.50 Mm

Product Description

The SUMITOMO 5VHY419 is a solid carbide jobber-length drill from the MDW-HGS series, designed for high-performance metal cutting in demanding production environments. The drill measures 1.50 mm in diameter with a 135-degree split point and an overall length of 70.00 mm (2.756 inches). A multi-layer TiAlCr/TiSi proprietary coating reduces heat buildup and extends tool life when cutting through difficult materials. Coolant-through capability supports high-speed drilling cycles in CNC machining centers. This tool is intended for use by machinists and tooling specialists working in precision manufacturing and metalworking shops.

The 5VHY419 is optimized for drilling steel, stainless steel, and hardened materials across a range of production applications. The 5xD flute-to-diameter ratio and regular spiral flute geometry promote chip evacuation in deep-hole operations. Its straight cylindrical shank with a 3.00 mm shank diameter fits standard collets and drill chucks used in CNC machining centers and high-speed drill presses. This drill is well suited for high-volume production runs where tool life and hole quality in tough alloys are critical performance factors.

Key Features

• 1.50 mm drill diameter with h8 diameter tolerance for precision hole sizing
• 135-degree point angle with tapered web configuration for self-centering entry
• Multi-layer TiAlCr/TiSi coating for extended tool life in steel and hardened materials
• Coolant-through design supports high-speed and deep-hole drilling cycles
• 5xD flute ratio with regular spiral flutes for efficient chip evacuation
• Solid carbide construction for rigidity and wear resistance in demanding workpiece materials

Compatibility

Designed for use with steel, stainless steel, and hardened materials classified under workpiece material codes K, M, P, and S. Fits standard collets and drill chucks accepting a 3.00 mm straight cylindrical shank.

Installation Notes

Installation and tool changes should be performed by a qualified machinist with the spindle fully stopped and machine power locked out per applicable safety procedures. Secure the straight shank firmly in a collet or drill chuck rated for the intended RPM and feed rate. Verify coolant-through lines are clear and delivering adequate flow before initiating drilling cycles. Do not exceed the tool manufacturer's recommended cutting parameters for the target workpiece material.