Sumitomo 14HA314 ACP200 Milling Insert Solid Carbide

Product Description

The SUMITOMO 14HA314 is a solid carbide PVD-coated milling insert designed for use in indexable milling cutters. It carries the ACP200 manufacturer grade and features an AXMT insert style with a parallelogram shape and an 85-degree included angle. The insert measures 0.689 inches in cutting edge effective length, 0.402 inches wide, and 0.219 inches thick, with a corner radius of 0.031 inches. The PVD coating process provides wear resistance suited to steel workpiece applications. This insert is installed by machining professionals and toolroom technicians working with compatible indexable milling cutter bodies.

This insert is intended for milling operations on steel workpieces, designated by primary workpiece material code P. It is suited for both roughing and finishing passes where a right-hand cutting orientation is required. The maximum depth of cut is 0.551 inches (14.00 mm), making it appropriate for moderate-to-aggressive milling applications. It is compatible with the WEX3000 cutter series and uses the H chip breaker geometry. The insert size code is 1235, corresponding to the ISO insert size designation 170508.

Key Features

• ACP200 grade solid carbide with PVD coating for wear resistance in steel milling
• AXMT insert style, parallelogram shape with 85-degree included angle
• Right-hand cutting orientation with 11-degree relief angle
• Maximum depth of cut of 0.551 inches (14.00 mm)
• H chip breaker geometry for controlled chip evacuation
• Corner radius of 0.031 inches for edge strength and surface finish

Compatibility

Designed for use with the WEX3000 cutter series. Insert size code 1235, ISO size designation 170508. Verify cutter body seat geometry before installation.

Installation Notes

This insert is installed by machinists or toolroom technicians servicing indexable milling cutter bodies. Power down and lock out the machine spindle before replacing inserts. Use the appropriate torx or hex key to the cutter manufacturer torque specification for the seating screw. Inspect the insert pocket seat for wear or debris before seating the new insert.