Sumitomo 14EK324 Milling Insert DL1000 Solid Carbide

Product Description

The SUMITOMO 14EK324 is a solid carbide milling insert designed for use in indexable milling cutters. It features a parallelogram shape with an 85-degree included angle and an AXET insert style. The insert carries SUMITOMO grade DL1000, which uses a diamond-like carbon (DLC) coating process to deliver a coated finish suited for cutting non-ferrous metals. At 0.219 inches thick and 0.689 inches long, this is a right-hand insert with a corner radius of 0.016 inches and a cutting edge effective length of 17.54 mm. It is installed by machinists and CNC operators working with milling tool assemblies.

This insert is intended for milling operations on non-ferrous metal workpieces, including aluminum, copper, and similar materials where a DLC-coated solid carbide edge delivers clean, low-friction cutting. The AXET style and insert size code 1705 place it in the WEX3000 cutter series compatibility group. Typical applications include face milling and shoulder milling in production machining environments, both job shop and production floor settings. The right-hand configuration determines the required cutter body orientation. Thickness falls within the 0.200 to 0.220 inch range and length within 0.650 to 0.700 inches, consistent with standard indexable insert seating tolerances.

Key Features

• Solid carbide substrate with DLC (diamond-like carbon) coating process for extended edge life on non-ferrous materials
• Parallelogram insert shape with 85-degree included angle and 11-degree relief angle for positive cutting geometry
• AXET insert style, insert size 170504, compatible with WEX3000 cutter series
• Right-hand cutting orientation with 0.016 inch corner radius for controlled surface finish
• Cutting edge effective length of 17.54 mm with consistent thickness tolerance range of 0.200 to 0.220 inches

Compatibility

Compatible with the WEX3000 cutter series as specified by the manufacturer. Designed for right-hand cutter bodies accepting AXET-style inserts with insert size code 1705. Intended for use on non-ferrous metal workpieces.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. The cutter body must be removed from the spindle and fully de-energized before indexing or replacing inserts. Use the correct torx or hex key specified by the cutter body manufacturer to seat the insert clamp to proper engagement. Inspect the insert pocket for chips, wear, or debris before seating a new insert, as pocket condition directly affects cutting performance and insert life.