Sugatsune S-6166-6-L Flag Hinge Stainless Steel 6 Inch

Product Description

The SUGATSUNE S-6166-6-L is a heavy-duty flag hinge constructed from stainless steel with a satin finish. Flag hinges mount to a door or gate leaf on one side and a fixed frame or post on the other, allowing the door to be lifted off the pivot without removing fasteners. This hinge carries a rated static load capacity of 198 pounds, making it suitable for solid-core doors, access panels, and industrial enclosures. The leaf thickness of 15/32 inches and an overall width of 2-5/32 inches reflect a robust cross-section designed for demanding applications. It is typically installed by millworkers, cabinet installers, industrial maintenance technicians, and general contractors.

This flag hinge is suited for residential and light commercial applications including heavy interior doors, exterior gates, access hatches, and equipment enclosures where a removable-door configuration is required. The 6-inch leaf height makes it appropriate for doors requiring full-length bearing support along the hinge stile. A minimum door thickness of 2-5/32 inches should be confirmed before installation. The satin stainless steel finish resists corrosion and blends with brushed metal hardware on modern architectural and industrial installations.

Key Features

• 198 lb static load capacity supports solid-core and heavy panel doors
• Stainless steel construction provides corrosion resistance for interior and exposed environments
• Satin finish suits brushed metal hardware schemes
• Flag-style design allows door removal by lifting off the pivot pin without unfastening the leaves
• 15/32-inch pin diameter and leaf thickness for high-cycle, load-bearing service
• 6-inch leaf height distributes load across a wide bearing surface

Compatibility

Designed as an OEM-style replacement or new-installation flag hinge for doors and panels with a minimum door thickness of 2-5/32 inches and a frame leaf height requirement of 2-5/16 inches.

Installation Notes

Flag hinges are installed by woodworkers, millworkers, or general contractors using standard drill bits and wood screws or machine screws appropriate to the substrate. Confirm the door or panel thickness meets the 2-5/32-inch minimum before mounting. Align both leaves on a flat reference surface before drilling pilot holes to prevent binding at the pivot. For exterior or wet-area applications, use stainless steel fasteners to match the hinge material and prevent galvanic corrosion.