Sugatsune NSDX-10RK Door Damper 60 Lb Downward Flap

Product Description

The SUGATSUNE NSDX-10RK is a door damper rated for a 60-pound load capacity, designed to control the motion of downward opening flap doors and panels. Built from steel and zinc alloy with a nickel finish, it provides controlled resistance against uncontrolled drops, protecting cabinetry, furniture, and architectural millwork from impact damage. At 8.5 inches in overall length and 0.875 inches in width, it fits into compact mounting spaces without requiring extensive modification to the door or frame. Licensed millwork installers, cabinetmakers, and finish carpenters are the primary trades that specify and install this hardware.

The NSDX-10RK is suited for residential and light commercial applications where downward opening flaps require controlled, dampened motion. Typical installations include fold-down cabinet doors, Murphy bed panels, bar flaps, and access hatches where an uncontrolled drop under gravity load would damage the panel, the substrate, or the contents below. The nickel finish coordinates with standard brushed and polished hardware found in residential cabinetry and furniture.

Key Features

• 60-pound load capacity handles substantial panel weights common in cabinetry and furniture applications
• Steel and zinc alloy construction provides durability in repeated-cycle installations
• Nickel finish resists corrosion and coordinates with standard residential hardware finishes
• 8.5-inch overall length fits standard door and flap mounting configurations
• Compact 0.875-inch width minimizes intrusion into door or frame structure
• Designed specifically for downward opening flap applications

Compatibility

Designed for use in downward opening flap door assemblies in residential and light commercial cabinetry and furniture installations where a dampened motion control device is required.

Installation Notes

Installation is typically performed by cabinetmakers or finish carpenters using standard hand tools. Confirm that the mounting substrate can support the rated 60-pound load before fastening. Verify correct orientation of the damper per the manufacturer instructions prior to drilling pilot holes, as reversing the mounting direction will affect damper function. Do not overtighten fasteners into wood substrates, as stripping the pilot hole will reduce holding strength.