Sugatsune HG-CV65NR Aluminum Cabinet Hinge 2-3/8 in

Product Description

The SUGATSUNE HG-CV65NR is a single-knuckle aluminum cabinet hinge designed for right-hand door applications in cabinetry and light enclosure work. It measures 2-9/16 inches in length and 2-3/8 inches in overall width, with a leaf thickness of 9/64 inch (0.138 inch). The hinge is constructed entirely from aluminum, keeping weight low while maintaining structural integrity. At 0.2 pounds per unit, it is well suited for lightweight cabinet doors where corrosion resistance and a clean profile matter. Cabinetmakers, millwork installers, and finish carpenters are the typical tradespeople specifying this hardware.

This hinge is intended for residential and light commercial cabinet installations where an aluminum hinge is preferred over steel — particularly in environments with elevated humidity, such as kitchens, bathrooms, and coastal locations. Its right-hand orientation and single-knuckle design make it appropriate for overlay or inset door configurations where a low-profile barrel is required. The 35/64-inch butt width and 13/64-inch pin diameter reflect a compact geometry suited to thinner door and face-frame stock.

Key Features

• Aluminum construction — lightweight and corrosion resistant
• Single-knuckle design for a low-profile appearance on cabinet doors
• Right-hand orientation for standard right-hand door swing installations
• Leaf thickness of 9/64 inch allows flush mortise fitting in standard door stock
• Pin diameter of 13/64 inch provides consistent pivot action under repeated use
• Compact 2-3/8 inch width fits standard cabinet face-frame and overlay door applications

Compatibility

Designed as a right-hand aluminum cabinet hinge replacement or new-install component for light-duty residential and commercial cabinetry applications where an aluminum single-knuckle hinge is specified.

Installation Notes

Installation is typically performed by a cabinetmaker or finish carpenter using standard woodworking tools. Power down or disconnect any electrically operated cabinet components before working in the area. Mortise depth should match the 9/64-inch leaf thickness to achieve a flush surface. Follow applicable local building standards and manufacturer fastener recommendations for the door material being used.