Sti G3A279LD-EN Yellow Turn-to-reset Pull Station

Product Description

The SAFETY TECHNOLOGY INT'L INC G3A279LD-EN is a yellow turn-to-reset manual pull station designed for global multipurpose fire alarm applications. Manual pull stations serve as the primary hand-activated initiating devices in fire alarm systems, triggering an alarm signal when a person pulls the lever. The yellow housing provides a high-visibility indicator, and the turn-to-reset mechanism requires a deliberate action to return the device to standby after activation, reducing accidental resets. This type of device is a standard component in commercial and industrial fire alarm system design and is installed by licensed fire alarm technicians or qualified electricians.

This pull station is suited for multipurpose fire alarm installations where a globally compatible manual initiating device is required. The turn-to-reset design is commonly specified in commercial buildings, industrial facilities, schools, and institutional occupancies where controlled reset procedures are part of the fire response protocol. Its yellow color differentiates it from standard red pull stations and may be used to indicate specific alarm zones or functions as required by the system design.

Key Features

• Yellow housing for high-visibility identification and zone differentiation
• Turn-to-reset mechanism requires intentional reset action after activation
• Global multipurpose design for broad fire alarm system compatibility
• Manual pull lever operation for reliable hand-activated alarm initiation
• Sold individually as a single unit

Compatibility

Designed as a global multipurpose manual pull station for use in fire alarm systems where a turn-to-reset initiating device is specified. Verify compatibility with the installed fire alarm control panel before installation.

Installation Notes

Installation should be performed by a licensed fire alarm technician or qualified electrician in accordance with NFPA 72 and all applicable local codes. De-energize the fire alarm circuit before making any wiring connections. Mount the pull station at the code-required height, typically between 42 and 48 inches above the finished floor per NFPA 72 guidelines. After installation, test the device and verify proper alarm signal at the fire alarm control panel before returning the system to service.