Stewart Fastener J2700 Tapcon Screws 3/16x1-1/4 in Jar 100

Product Description

The STEWART FASTENER J2700 is a jar of 100 Tapcon-style concrete anchor screws sized at 3/16 inches in diameter by 1-1/4 inches in length. These hardened masonry screws are designed to thread directly into pre-drilled holes in concrete, block, and brick without requiring an anchor or insert. The hi-lo thread pattern cuts into the base material and holds under load, making them a reliable fastening solution for attaching wood, metal, and other materials directly to masonry substrates. Licensed electricians, HVAC installers, plumbers, and general contractors reach for this fastener type when securing equipment, conduit straps, pipe hangers, and equipment bases to concrete floors, walls, and ceilings.

This jar quantity is suited for ongoing service work or installation projects where multiple fastening points are required. The 3/16 inches by 1-1/4 inches size is a common choice for lighter-duty anchoring tasks in residential and light commercial construction, including securing electrical boxes, small equipment brackets, and conduit supports to poured concrete or CMU block. Sold per jar of 100 pieces.

Key Features

• Tapcon-style hi-lo thread design cuts directly into concrete, brick, and block
• 3/16 inches diameter by 1-1/4 inches length — common size for light-duty masonry anchoring
• 100 pieces per jar for repeat-use service and installation jobs
• No expansion anchor or insert required — installs into a pre-drilled pilot hole
• Suitable for attaching conduit straps, pipe hangers, brackets, and equipment bases to masonry

Compatibility

Designed for use in concrete, brick, and CMU block substrates where a direct-embed masonry screw fastener is required. Consult the pilot hole size specification for this screw diameter before drilling.

Installation Notes

Installation requires a hammer drill and the correct carbide-tipped masonry bit sized for a 3/16 inches Tapcon-style screw. Drill the pilot hole to the required depth, clear debris from the hole, then drive the screw with an appropriate bit driver. Follow local building codes and manufacturer minimum embedment requirements for the substrate type. Do not overdrive — stripping the threads in the base material will reduce holding strength.

Technical Specifications

• Diameter: 3/16 inches
• Length: 1-1/4 inches
• Quantity per Jar: 100 pieces
• UPC: 66235215911

Standard Information

• Brand: STEWART FASTENER
• Manufacturer Part Number: J2700