Sterling 71101122-0 Soaking Bathtub 40 Gal 60 in Alcove Right Drain

Product Description

The STERLING 71101122-0 is a 60-inch alcove soaking bathtub constructed from Vikrell, a solid composite material known for structural strength and resistance to flexing. The tub measures 60 inches in length and 37.5 inches in width, with an overall height of 22.25 inches and a tub depth of 18.25 inches. The soaking depth reaches 11 inches, and the unit holds up to 40 gallons of water. A built-in contoured back and integrated armrests provide ergonomic support during use. The high-gloss white finish is smooth and non-porous, making routine cleaning straightforward. Right-side drain placement is fixed. Licensed plumbers and remodeling contractors handle installation in three-wall alcove configurations.

This bathtub is designed for residential three-wall alcove installations where a standard 60-inch tub footprint is required. The soaking bath format without jets or air systems suits applications where a clean, quiet soak is the primary goal. The bathing well dimensions are 52 inches by 29 inches at the top and 40 inches by 21 inches at the bottom interior, giving a clear sense of usable interior space. The right drain location must align with the rough-in drain position in the floor. The unit ships without a drain assembly, so a 2-inch drain kit must be sourced separately. ADA compliance and certification to CSA B45.5/IAPMO Z124, ASTM E162, ASTM E662, and ICC/ANSI A117.1 make this unit appropriate for accessible bath applications.

Key Features

• Vikrell solid composite construction provides rigidity and long-term durability without a steel or fiberglass subframe
• 40-gallon water capacity with an 11-inch soaking depth for full immersion
• Built-in armrests and contoured back for ergonomic support
• High-gloss white finish is non-porous and easy to clean
• ADA compliant and meets ICC/ANSI A117.1 for accessible installations
• Overflow hole included; drain sold separately
• 10-year limited manufacturer warranty

Compatibility

Designed for standard three-wall alcove installations with a 60-inch rough-in length and right-side 2-inch floor drain. Drain assembly is not included and must be purchased separately.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with local plumbing codes and IPC requirements. Shut off the water supply and verify the drain rough-in location matches right-side placement before setting the tub. The alcove framing must be plumb and level, and the tub flange should be secured to wall studs per the manufacturer installation instructions. Do not install the drain or overflow until the tub is permanently set and the surround is in place.