Steinen s.65-45-2f Solid Oil Burner Nozzle 0.65 Gph

Product Description

The STEINEN s.65-45-2f is a solid-cone oil burner nozzle rated at 0.65 gallons per hour (GPH) with a 45-degree spray angle. It meters and atomizes fuel oil into the combustion chamber of a residential or light-commercial oil-fired heating system. The solid spray pattern delivers a dense, concentrated flame shape suited for smaller combustion chambers. HVAC and oil burner technicians install this nozzle as part of routine annual tune-ups or when replacing a fouled or worn nozzle to restore proper combustion efficiency and heat output.

This nozzle is appropriate for use in oil-fired furnaces, boilers, and water heaters that call for a 0.65 GPH firing rate and a 45-degree solid-cone spray pattern. The 45-degree angle is commonly specified in tighter combustion chambers where a narrower flame envelope is required. Refer to the burner manufacturer's nozzle specification chart and the appliance rating plate to confirm the correct GPH, angle, and spray pattern before installation.

Key Features

• 0.65 GPH flow rate for precise fuel metering in low-firing-rate applications
• 45-degree solid-cone spray pattern for concentrated flame shape in compact combustion chambers
• Solid construction for consistent atomization and durable service life
• Standard nozzle thread for compatibility with common oil burner nozzle adapters and line assemblies

Compatibility

Designed as an OEM-style replacement nozzle for residential and light-commercial oil-fired furnaces, boilers, and water heaters specifying a 0.65 GPH, 45-degree, solid-cone nozzle.

Installation Notes

Oil burner nozzles are installed by licensed HVAC technicians or oil burner service professionals. Shut down the burner and allow the system to cool before servicing the nozzle assembly. Use a proper nozzle wrench to remove and install the nozzle without stressing the nozzle adapter or fuel line. Always verify firing rate, spray angle, and spray pattern against the appliance data plate and burner manufacturer specifications before installing a replacement nozzle.