State Water Heaters 100344272 Lowboy Electric Water Heater 36 Gal

Product Description

The STATE WATER HEATERS 100344272 is a residential lowboy electric water heater rated at 36 gallons with dual 4500-watt elements operating on a 240-volt supply. Its low-profile tank measures 24 inches in diameter by 32 inches in height, making it well suited for installations where vertical clearance is limited. The glass-coated steel tank is protected by a Coregard stainless steel anode rod and insulated with non-CFC foam to reduce standby heat loss. A Uniform Energy Factor of 0.92 reflects efficient operation, and the unit carries a 6-year limited tank warranty. The T and P relief valve is supplied with the unit, and a brass drain valve is fitted at the base.

This water heater is designed for residential applications where a standard upright unit does not fit — typically in crawl spaces, under counters, or in low-ceiling mechanical rooms. The lowboy form factor delivers full 36-gallon capacity at a reduced height of 32 inches. Recovery is rated at 21 gallons per hour at a 90 degrees F rise, making it appropriate for small to medium households. Installation is handled by a licensed plumber in accordance with local plumbing codes and the manufacturer installation instructions.

Key Features

• Dual 4500-watt elements on a 240-volt circuit for consistent hot water recovery
• Low-profile tank at 24 inches diameter by 32 inches height fits space-restricted mechanical areas
• Glass-coated tank interior with Coregard stainless steel anode rod for corrosion resistance
• Non-CFC foam insulation reduces standby heat loss
• Self-cleaning dip tube helps minimize sediment buildup in the tank
• T and P relief valve supplied; brass drain valve with screwdriver-slot operation included
• Certified to UL and CSA standards; NAECA compliant

Compatibility

Designed as an OEM-style replacement or new-installation residential electric lowboy water heater for applications requiring a 240-volt, 36-gallon low-profile unit with 3/4-inch male threaded inlet and outlet connections.

Installation Notes

Installation must be performed by a licensed plumber in accordance with the International Plumbing Code and all applicable local codes. Shut off the electrical supply at the breaker panel and close the cold water supply valve before beginning work. Verify that the dedicated 240-volt circuit is properly sized and grounded before connecting power. The T and P relief valve must be installed and piped to a safe discharge location per code before placing the unit in service.

Technical Specifications

• Tank Capacity: 36 gallons
• Input Supply Voltage: 240 volts
• Number of Elements: 2
• Element Power Rating: 4500 watts each
• Recovery Rate: 21 GPH at 90 degrees F rise
• Uniform Energy Factor: 0.92
• Tank Dimensions: 24 inches diameter x 32 inches height
• Tank Material: Glass coated steel
• Anode Rod Material: Coregard stainless steel
• Insulation: Non-CFC foam
• Inlet/Outlet Connection: 3/4 inches male threaded x 3/4 inches male threaded
• Drain Valve: Brass
• Pressure Rating: 150 psi
• Tank Warranty: 6-year limited
• Certifications: UL, CSA, NAECA compliant
• Type: Lowboy

Standard Information

• Brand: STATE WATER HEATERS
• Manufacturer Part Number: 100344272