Starrett 55047 Low Carbon Steel Flat Stock 24x3.5x1 in

Product Description

The STARRETT 55047 is a low carbon steel flat stock bar measuring 24 inches long, 3.5 inches wide, and 1 inch thick. It is manufactured to AISI Type C1018 material specification, a widely used low carbon steel grade valued for its consistent machinability, weldability, and mild strength. This flat stock is held to tight dimensional tolerances, including plus or minus 0.001 inches on both thickness and squareness. It is used by machinists, fabricators, maintenance technicians, and tradespeople who require a precision-cut steel flat bar for structural, mechanical, or shop fabrication applications.

C1018 low carbon steel flat stock is a standard material in machine shops, fabrication facilities, and industrial maintenance environments. It is commonly used to fabricate brackets, supports, wear plates, mounting bases, and general structural components. The controlled tolerances on this bar make it suitable for applications where dimensional accuracy matters at the layout and machining stage. It is appropriate for both light structural use and secondary machining operations such as drilling, milling, and welding.

Key Features

• AISI Type C1018 low carbon steel for consistent machinability and weldability
• 24-inch length with a plus 0.625-inch length tolerance
• 3.5-inch width held to plus 0.000 to 0.005-inch tolerance
• 1-inch thickness with plus or minus 0.001-inch tolerance
• Squareness tolerance of plus or minus 0.001 inches
• Single-piece packaging suitable for individual job or shop use

Compatibility

Designed as a general-purpose low carbon steel flat stock suitable for machine shop fabrication, maintenance repair, and light structural applications where AISI C1018 material specification is required.

Installation Notes

This flat stock is typically cut, drilled, or machined by qualified machinists or fabricators using appropriate metalworking equipment. Always use proper personal protective equipment when cutting or grinding steel. Secure the workpiece firmly before any machining or cutting operation. Follow applicable shop safety standards and local codes when welding or fastening steel components.