Starrett 54890 Low Carbon Steel Flat Stock 3/32x5x24 in

Product Description

The STARRETT 54890 is a low carbon steel flat stock bar measuring 3/32 inch thick, 5 inches wide, and 24 inches long. Manufactured to Type C1010 material specification, it provides consistent dimensional accuracy with tight machined tolerances: plus or minus 0.001 inch on thickness and squareness, plus 0.000 to 0.005 inch on width, and plus 0.625 inch on length. At 3.16 pounds per piece, this flat stock is suited for fabrication, maintenance, and repair work in mechanical, HVAC, plumbing, and general trade applications where a reliable, machinable low-carbon steel bar stock is required.

This flat stock is used in light fabrication and repair scenarios across residential and commercial trade environments. Typical applications include making custom brackets, shims, support plates, and weld-up assemblies. It machines and welds readily due to its low carbon content. Installers and fabricators working in HVAC, plumbing, or electrical panel support contexts will find it useful for custom metalwork and field modifications where standard hardware does not meet dimensional requirements.

Key Features

• Type C1010 low carbon steel for good machinability and weldability
• Thickness tolerance of plus or minus 0.001 inch for consistent part fit
• Width tolerance of plus 0.000 to 0.005 inch for precise mating surfaces
• Length tolerance of plus 0.625 inch allows for cut-to-length flexibility
• Square tolerance of plus or minus 0.001 inch supports accurate layout work
• Single-piece packaging with no minimum order quantity above one unit

Compatibility

Designed as a standard-dimension flat bar stock for use in general fabrication and trade repair applications requiring Type C1010 low carbon steel in a 3/32 x 5 x 24 inch profile.

Installation Notes

Cutting, drilling, and welding operations should follow standard metalworking practices appropriate to low carbon steel. Use proper personal protective equipment including eye and hand protection when cutting or grinding. Deburr all cut edges before installation in assemblies to avoid injury and ensure proper fit. Consult applicable codes such as the NEC or IFGC when using fabricated metal components in electrical or gas system support structures.