Starrett 40102 Bi-metal Power Hacksaw Blade 10 Tpi

Product Description

The STARRETT 40102 is a bi-metal power hacksaw blade designed for use in stationary power hacksaw machines. It measures 14 inches in length, 1-3/8 inches in width, and 0.062 inches in thickness, with a constant-pitch tooth pattern at 10 teeth per inch (TPI). The bi-metal construction bonds a high-speed steel tooth edge to a flexible alloy steel backing, delivering durability under the repeated stress of power-driven cutting cycles. This blade is sold individually and suits metal fabrication shops, maintenance facilities, and trade professionals who run power hacksaws for bar stock, pipe, and structural cutting.

This blade fits standard 14-inch power hacksaw machines used in light industrial and maintenance settings. The 10 TPI constant-pitch pattern is suited for cutting medium-section ferrous and non-ferrous metals, including bar stock, tubing, and solid sections where a moderate feed rate and clean cut are required. The 0.281-inch pinhole diameter fits standard power hacksaw blade mounting pins. It is an appropriate choice for metalworking tradespeople and fabricators working with production or repair cutting tasks.

Key Features

• Bi-metal construction with high-speed steel teeth bonded to a flexible alloy steel backing for extended blade life
• 10 TPI constant-pitch tooth pattern for consistent, controlled cuts in medium-section metals
• 14-inch blade length fits standard power hacksaw machines
• 1-3/8 inches wide by 0.062 inches thick for rigidity during powered cutting strokes
• 0.281-inch pinhole diameter for secure mounting on standard power hacksaw pin configurations
• Sold individually with no minimum order quantity above one unit

Compatibility

Designed as an OEM-style replacement blade for standard 14-inch stationary power hacksaw machines that accept blades with a 0.281-inch pinhole diameter.

Installation Notes

Installation is performed by qualified metalworking technicians or maintenance tradespeople familiar with stationary power hacksaw equipment. Power down and disconnect or lock out the machine before removing the old blade or installing a new one, following OSHA lockout/tagout procedures. Verify that the blade is tensioned according to the machine manufacturer's specifications and that the pinhole seats fully on the mounting pins before resuming operation. Handle blade edges with appropriate cut-resistant gloves.