Starrett 20626 Welded Bandsaw Blade 4-6 Tpi Bi-metal

Product Description

The STARRETT 20626 is a welded bi-metal bandsaw blade from the Intenss PRO series, designed for continuous cutting of ferrous and non-ferrous metals on stationary band saw equipment. It measures 130.5 inches in length, 1 inch in width, and 0.035 inches in thickness. The blade pairs a flexible back with a high speed steel tooth edge, running a variable 4 to 6 TPI pitch with a raker tooth set and positive rake angle. This combination promotes efficient chip clearance and reduced vibration during cuts. Metalworking shops, maintenance facilities, and industrial fabricators rely on this blade for demanding sawing applications where blade longevity and cut quality are both priorities.

The 20626 is suited for cutting ferrous metals such as structural steel, tubing, and angle iron, as well as non-ferrous metals including aluminum and brass. It is intended for use on horizontal or vertical band saws that accept a 130.5-inch blade with a 1-inch width. The variable pitch tooth pattern makes it well suited for workpieces that vary in cross-section or wall thickness, helping to prevent tooth stripping and chatter. Licensed metalworking and fabrication professionals are the primary installers and users of this blade.

Key Features

• Bi-metal construction pairs a flexible alloy steel back with high speed steel teeth for durability under heavy cutting loads
• Variable 4 to 6 TPI pitch reduces vibration and chatter, particularly on variable-thickness workpieces
• Raker tooth set and positive rake angle promote aggressive, efficient chip removal
• Straight tooth form supports consistent, repeatable cuts on both ferrous and non-ferrous metals
• Welded blade construction provides a continuous loop ready for immediate installation
• Intenss PRO series engineering targets extended blade life in demanding production environments

Compatibility

Designed for stationary band saws that accept a 130.5-inch long, 1-inch wide blade with a 0.035-inch thickness. Suitable for cutting ferrous metal and non-ferrous metal workpieces. Verify machine blade-length specification and wheel capacity before installation.

Installation Notes

Blade installation should be performed by a qualified operator following the band saw manufacturer's guidelines. Power down and lock out the machine completely before removing or mounting any blade. Wear cut-resistant gloves when handling the coiled or open blade, as the tooth edge presents a laceration hazard. Confirm correct blade tension per the saw manufacturer's specification before resuming operation.