Starrett 19582 Welded Bandsaw Blade 14 Ft 1 in 8 Tpi

Product Description

The STARRETT 19582 is a welded bandsaw blade from the Duratec SFB series, designed for continuous cutting in stationary bandsaw applications. It measures 14 feet in length, 1 inch in width, and 0.035 inches in thickness, with a constant-pitch 8 TPI tooth configuration. The blade is constructed entirely of carbon steel, including both the back and the tooth material, offering consistent performance across a range of general-purpose cutting tasks. A raker tooth set and straight tooth form deliver efficient chip clearance and smooth feed through ferrous and non-ferrous materials. This blade is installed by metalworking professionals, fabricators, and maintenance technicians in shop and production environments.

The STARRETT 19582 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood on horizontal or vertical bandsaws that accept a 14-foot blade with a 1-inch width. The 8 TPI constant pitch is appropriate for medium-thickness stock where a balance of cut speed and surface finish is required. The flexible back construction allows the blade to track smoothly around bandsaw wheels, reducing the risk of fatigue cracking during extended production runs. It is a practical choice for job shops, fabrication shops, and maintenance facilities handling a variety of workpiece materials.

Key Features

• 14-foot welded loop — ready to install, no field joining required
• 1 inch wide, 0.035 inches thick carbon steel construction throughout blade and teeth
• 8 TPI constant pitch for consistent chip load across medium-thickness stock
• Raker tooth set with straight tooth form for efficient chip evacuation
• Flexible back design reduces wheel fatigue and extends blade service life
• Contour cutting capable — suitable for curved and straight cut paths

Compatibility

Designed for stationary bandsaws that accept a 14-foot blade with a 1-inch width and 0.035-inch thickness. Compatible material applications include ferrous metal, non-ferrous metal, plastic, and plywood.

Installation Notes

Blade installation should be performed by qualified personnel with the bandsaw powered off and locked out per OSHA lockout/tagout procedures. Verify wheel diameter, blade guide clearance, and tension specifications on the host machine before mounting. Blade tracking and tension should be confirmed with the guard closed before resuming cutting operations. Wear appropriate cut-resistant gloves when handling uncoiled or loose bandsaw blades.