Starrett 19580 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 19580 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on stationary band saw equipment. Measuring 13 feet 11 inches in length and 0.625 inches wide with a 0.032-inch thickness, this blade runs at a constant 14 teeth per inch (TPI) pitch with a straight tooth form and raker tooth set. The flexible back type allows the blade to track smoothly through the saw's wheel and guide assemblies. It is a single-piece welded blade, ready to install without additional joining. Machinists, fabricators, and maintenance technicians working with light-gauge metals and non-metallic materials will find this blade a practical production-floor option.

This blade is suited for use in light industrial and shop environments where a consistent, general-purpose cutting profile is needed. The 14 TPI constant pitch and raker set make it effective on ferrous metal, non-ferrous metal, plastic, and plywood. It is intended for horizontal or vertical stationary band saws that accept a 0.625-inch-wide blade with a 13-foot 11-inch loop length. Typical users include metal fabrication shops, maintenance and repair operations, and woodworking or plastics facilities running mixed-material cutting tasks.

Key Features

• Duratec SFB series carbon steel construction for both blade body and tooth material
• 14 TPI constant pitch for predictable chip load across supported materials
• Raker tooth set with straight tooth form for general-purpose contour cutting
• Flexible back type for smooth tracking on bandsaw wheel and guide assemblies
• Toothed edge with contour cutting capability across ferrous metal, non-ferrous metal, plastic, and plywood
• Welded loop construction ships ready to install — no field joining required

Compatibility

Designed as an OEM-style replacement or direct-fit blade for stationary band saws accepting a 0.625-inch-wide blade with a 13-foot 11-inch loop length.

Installation Notes

Installation should be performed by a qualified technician following the saw manufacturer's blade change procedure. Disconnect and lock out power to the band saw before removing the existing blade or installing the new one. Verify wheel tension and blade guide alignment after installation and before resuming cuts. Blade handling requires cut-resistant gloves due to exposed tooth edges along the full loop length.