Starrett 16926 Welded Bandsaw Blade 24 Tpi Bi-metal

Product Description

The STARRETT 16926 is a welded bi-metal bandsaw blade engineered for consistent, repeatable cuts in metal fabrication and industrial cutting applications. The blade measures 64.5 inches in total length and 0.5 inches in width, with a uniform 0.0200-inch thickness throughout. The cutting edge runs 24 teeth per inch in a constant pitch configuration, making it well suited for smooth, controlled cuts through thin-section metals. High speed steel teeth are electron beam welded to a flexible alloy steel back, combining edge hardness with back flexibility to resist blade fatigue during continuous operation. Licensed HVAC, plumbing, and mechanical contractors regularly stock bandsaw blades like this for jobsite copper, conduit, and ferrous metal cutting tasks.

The STARRETT 16926 is designed for contour cutting and straight-line work on steel, ferrous metals, and aluminum. The wavy tooth set controls chip load and helps prevent tooth stripping when cutting thin-wall or small-section stock. The straight tooth rake angle promotes consistent bite geometry across the cut. The Univerz series designation indicates broad material compatibility, making this blade a practical general-purpose choice for shops and service vehicles handling mixed metal stock. It ships individually and is ordered in single-unit quantities.

Key Features

• Bi-metal construction: high speed steel teeth bonded to a flexible alloy back for extended blade life
• 24 TPI constant pitch for smooth cuts in thin and medium-section metals
• Wavy tooth set reduces cutting pressure and minimizes tooth stripping on thin stock
• Contour cutting capable for curved and irregular cut paths
• 64.5-inch welded loop length fits standard benchtop and portable bandsaw frames designed for that size
• Rated for steel, ferrous metal, and aluminum applications

Compatibility

Designed to fit bandsaw machines that accept a 64.5-inch blade loop with a 0.5-inch blade width. Verify your saw's specified blade length, width, and thickness tolerances before installation.

Installation Notes

Bandsaw blade replacement is typically performed by maintenance technicians or tool operators following the saw manufacturer's blade change procedure. Power down and unplug or lock out the saw before opening blade guards or handling the blade. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades, as the teeth present a laceration hazard. Confirm blade tension to the saw manufacturer's specification using the machine's built-in tensioning guide before resuming operation.