Starrett 16891 Welded Bandsaw Blade 3 Tpi Carbide-tipped

Product Description

The STARRETT 16891 is a welded bandsaw blade engineered for cutting ferrous and non-ferrous metals in demanding shop and production environments. Part of the Advanz TS series, it is built with a micrograin carbide-tipped tooth and a straight tooth form with a positive rake angle, delivering clean, efficient cuts through a wide range of metal stock. The blade measures 160 inches in length and 3/4 inch in width with a constant 3 TPI pitch, making it well-suited for slower feed rates and thicker cross-sections. A flexible back type absorbs vibration and resists fatigue over extended use. Licensed HVAC, plumbing, and metalworking tradespeople handling pipe, duct stock, or structural metal will recognize this blade's construction-grade durability.

The 16891 is designed for metal-cutting bandsaw applications in residential and commercial trade settings. Its raker tooth set and constant pitch pattern make it effective on solid bar stock, structural shapes, tubing, and pipe — both ferrous and non-ferrous. The carbide-tipped micrograin teeth hold an edge longer than bi-metal alternatives in abrasive or interrupted-cut conditions. Typical users include metal fabricators, pipefitters, and mechanical contractors who run stationary bandsaws regularly for cutting stock to length before installation.

Key Features

• Micrograin carbide-tipped teeth for extended edge life on ferrous and non-ferrous metals
• Constant 3 TPI pitch suited for thick cross-section cuts and steady feed rates
• Raker tooth set with positive rake angle for efficient chip clearance
• Flexible back type resists blade fatigue and absorbs cutting vibration
• Welded construction provides a continuous loop with no joint weakness
• Advanz TS series micrograin carbide grade for consistent performance in production use

Compatibility

Designed for metal-cutting bandsaws that accept a 160-inch blade loop that is 3/4 inch wide and 0.035 inches thick. Verify your saw's wheel diameter, blade guide spread, and maximum blade width before installation.

Installation Notes

Bandsaw blade installation should be performed by a qualified operator following the saw manufacturer's instructions. Power down and lock out the machine before removing the existing blade or threading the new one. Proper blade tension is critical — under-tensioning causes blade drift and premature fatigue, while over-tensioning accelerates wheel and bearing wear. Confirm blade tracking is centered on the wheels before resuming cuts.