Starrett 16458 Welded Bandsaw Blade 6 Tpi Carbon Steel

Product Description

The STARRETT 16458 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous cutting in industrial and trade shop applications. The blade measures 154 inches in total length and 0.5 inches in width, with a thickness of 0.025 inches and a constant-pitch 6 TPI configuration. The raker tooth set and straight tooth form deliver consistent chip clearance and controlled feed across a range of workpiece materials. Licensed trades and production shop operators install this blade on horizontal and vertical bandsaws where a durable, general-purpose carbon steel blade is the specified consumable.

This blade is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The flexible back construction allows the blade to run on standard bandsaw wheel diameters without premature fatigue cracking. Contour cutting capability makes it a practical choice for fabrication shops, maintenance facilities, and plumbing or HVAC trades cutting pipe, conduit, and structural stock. The constant pitch pattern maintains a steady cut rate and reduces vibration during straight and curved cuts.

Key Features

• Duratec SFB series carbon steel blade with consistent material quality throughout tooth and back
• 6 TPI constant pitch for general-purpose cutting across metal, plastic, and wood-based materials
• Raker tooth set with straight tooth form for balanced chip evacuation and cut control
• Flexible back construction reduces fatigue and extends blade service life on standard bandsaw equipment
• Contour cutting capable for curved or irregular profiles
• Toothed cutting edge with straight rake angle for predictable feed and surface finish

Compatibility

Designed as a welded loop replacement blade for bandsaws accepting a 154-inch blade length and 0.5-inch blade width. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as stated by the manufacturer.

Installation Notes

Bandsaw blade replacement should be performed by a qualified operator following the saw manufacturer's service procedure. Power down and lock out the bandsaw before removing the worn blade and installing the new loop. Verify wheel diameter, blade tension setting, and guide bearing clearance against the saw manufacturer's specifications before resuming operation. Wear cut-resistant gloves when handling the coiled blade during installation.