Starrett 16393 Welded Bandsaw Blade 12 Ft 6 in 4 Tpi

Product Description

The STARRETT 16393 is a welded bandsaw blade from the Duratec SFB series, designed for continuous contour cutting on stationary band saw machines. The blade measures 12 feet 6 inches in length and 0.5 inches in width, with a thickness of 0.025 inches. It runs at 4 teeth per inch (TPI) with a constant pitch pattern. Both the blade body and teeth are made from carbon steel with a flexible back, making this a practical choice for shops and trade professionals who cut a range of materials on a daily basis.

The 16393 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood, covering a broad range of material applications in fabrication, mechanical, and general trade shop environments. The hook tooth form with a positive rake angle promotes aggressive, efficient cutting, while the raker tooth set delivers consistent chip clearance. This blade is a fit for vertical band saw machines that accept a 12-foot 6-inch loop blade at 0.5-inch width.

Key Features

• Duratec SFB series carbon steel construction for both blade body and teeth
• Hook tooth form with positive rake angle for aggressive, efficient cuts
• Raker tooth set for consistent chip clearance and straight tracking
• Constant 4 TPI pitch for steady feed rate across multiple materials
• Flexible back type reduces blade fatigue during contour cutting
• Welded loop construction for use on stationary vertical band saws

Compatibility

Designed as a replacement welded loop bandsaw blade for stationary vertical band saw machines accepting a 12-foot 6-inch blade at 0.5-inch width and 0.025-inch thickness. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood.

Installation Notes

Blade installation and tensioning should be performed by a qualified technician following the band saw manufacturer's service guidelines. Disconnect and lock out power to the machine before removing the old blade or mounting the new one. Verify wheel diameter and blade guide settings are compatible with a 0.5-inch wide blade before installation. Eye protection and cut-resistant gloves are recommended when handling bandsaw blades.