Starrett 16388 Welded Bandsaw Blade 14 Tpi Bi-metal M42

Product Description

The STARRETT 16388 is a welded bi-metal bandsaw blade engineered for continuous cutting of ferrous and non-ferrous metals. At 124 inches (10 feet 4 inches) long and 0.5 inches wide with a 0.035-inch thickness, this blade is built for metal-cutting bandsaws in shop and fabrication environments. The M42 high speed steel tooth construction delivers durability under high heat and chip load. A 14 TPI constant-pitch configuration and positive rake angle combine to produce smooth, consistent cuts at a controlled feed rate. Raker tooth set promotes efficient chip clearance, reducing heat buildup during extended cuts.

The 16388 is suited for production shops, metalworking facilities, and maintenance operations where consistent metal section cutting is required. The constant pitch and straight tooth form make it a reliable choice for cutting solid bar stock, structural shapes, pipe, and tubing from both ferrous and non-ferrous materials. The flexible back type allows the blade to track cleanly on standard metal-cutting bandsaw wheels without excessive fatigue stress at the weld joint. This blade is handled and installed by machinists, fabricators, and maintenance technicians.

Key Features

• M42 high speed steel teeth for extended cutting life in tough ferrous alloys
• 14 TPI constant pitch for smooth, consistent cuts in solid and structural stock
• Raker tooth set promotes efficient chip evacuation and reduced heat
• Positive rake angle improves cutting aggression and feed efficiency
• Flexible back construction minimizes weld fatigue during blade flex
• Toothed cutting edge supports contour as well as straight cutting

Compatibility

Designed as an OEM-style replacement or aftermarket blade for metal-cutting bandsaws accepting a 124-inch (10 feet 4 inches) loop length and 0.5-inch blade width. Suitable for cutting ferrous metal and non-ferrous metal workpieces.

Installation Notes

Blade installation should be performed by a qualified machinist or fabricator with the bandsaw fully powered off and disconnected from its power source before any blade change. Verify blade tracking and tension adjustment per the bandsaw manufacturer specifications before resuming operation. Wear cut-resistant gloves when handling the blade loop, as tooth edges are sharp. Confirm wheel diameter and blade guide spacing are compatible with a 0.5-inch wide blade before installation.