Starrett 16120 Welded Bandsaw Blade 6-10 Tpi Bi-metal

Product Description

The STARRETT 16120 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional shop and industrial environments. Part of the Intenss PRO series, this blade measures 158 inches long, 1 inch wide, and 0.035 inches thick. The 6 to 10 TPI variable pitch tooth pattern reduces harmonic vibration and improves chip clearance across a range of material thicknesses. High speed steel teeth are electron-beam welded to a flexible alloy steel back, delivering edge retention and resistance to tooth stripout under load. Licensed machinists, fabricators, and metal shop technicians are the primary installers and users of this blade.

This blade is suited for cutting ferrous and non-ferrous metals on vertical or horizontal bandsaw machines that accept a 158-inch blade in 1-inch width. The variable pitch design handles structural steel, tube, bar stock, and aluminum profiles efficiently. The raker tooth set and positive rake angle promote aggressive, consistent cuts with minimal heat buildup. It is appropriate for both production and job-shop environments where blade life and cut quality on metal workpieces are priorities.

Key Features

• Bi-metal construction with high speed steel teeth bonded to a flexible alloy back for extended blade life
• 6 to 10 TPI variable pitch reduces vibration and improves surface finish on varied cross-sections
• Raker tooth set with positive rake angle for efficient chip evacuation on ferrous and non-ferrous metals
• Straight tooth form delivers consistent, controlled cutting geometry throughout the blade life
• Flexible back type resists fatigue cracking under continuous bandsaw operation
• Intenss PRO series — designed for high-performance metal cutting in production environments

Compatibility

Designed to fit bandsaw machines that accept a 158-inch loop blade with a 1-inch blade width. Suitable for cutting ferrous metals and non-ferrous metals as noted in manufacturer specifications.

Installation Notes

Blade installation should be performed by a qualified machinist or shop technician with the bandsaw fully powered down and locked out per applicable OSHA lockout/tagout procedures. Verify wheel diameter, blade guide spacing, and tension settings match the manufacturer specifications for your specific bandsaw model before installing. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades. Do not exceed the blade speed rating of the saw for the material being cut.