Starrett 15487 Bi-metal Bandsaw Blade 6 to 10 Tpi

Product Description

The STARRETT 15487 is a bi-metal bandsaw blade from the Intenss PRO series, designed for cutting ferrous and non-ferrous metals on band saw equipment. It measures 10 feet 10 inches in length, 1 inch wide, and 0.035 inches thick. The blade uses a variable pitch tooth pattern ranging from 6 to 10 TPI, which reduces harmonic vibration and helps maintain consistent cut quality across varying material thicknesses. The M42 high speed steel tooth material provides heat resistance and edge retention under demanding cutting conditions. This blade is typically installed by machinists, fabricators, and maintenance technicians working in metal cutting applications.

The 15487 is suited for production and job shop environments where both ferrous metals and non-ferrous metals are cut on horizontal or vertical band saws. The variable pitch design makes it effective across a range of material cross-sections, from solid bar stock to structural shapes. The raker tooth set and positive rake angle promote aggressive, efficient chip evacuation during cuts. The flexible back construction allows the blade to flex through the saw's wheel path without premature fatigue cracking.

Key Features

• Bi-metal construction with M42 high speed steel teeth for extended blade life on metal cutting
• Variable pitch 6 to 10 TPI reduces vibration and improves surface finish across varying stock sizes
• Raker tooth set with positive rake angle promotes efficient chip removal
• Flexible back material resists fatigue cracking through repeated wheel flex
• Straight tooth form provides consistent, predictable cutting geometry
• Suitable for both ferrous and non-ferrous metal applications

Compatibility

Designed as a welded-loop replacement blade for band saws accepting a 10 feet 10 inch by 1 inch bi-metal blade. Confirm wheel spacing, blade width capacity, and blade guide clearance on the specific saw before installation.

Installation Notes

Band saw blade replacement should be performed by a qualified technician with the machine fully de-energized and locked out per applicable OSHA lockout/tagout procedures. Wear cut-resistant gloves when handling the coiled blade. Set blade tension and tracking according to the saw manufacturer's specifications before resuming operation. Inspect blade guides and wheel tires for wear before installing a new blade.