Starrett 15107 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 15107 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting in metalworking and fabrication applications. The blade measures 150 inches long and 0.25 inches wide, with a thickness of 0.025 inches and a constant-pitch 14 TPI tooth configuration. The straight tooth form and raker tooth set deliver consistent chip clearance and smooth cutting performance. A flexible back type allows the blade to track cleanly through the bandsaw drive system. This blade is installed by machinists, fabricators, and maintenance technicians working with vertical or horizontal band saws in shop environments.

The STARRETT 15107 suits applications involving ferrous metal, non-ferrous metal, plastic, and plywood. The 14 TPI constant pitch pattern is well suited for general-purpose cutting of thin to medium stock in these materials. The raker tooth set distributes cutting load evenly across the blade, reducing tooth strippage during demanding cuts. This blade is a practical choice for job shop, maintenance, and production environments where a single blade needs to handle a range of materials and cross-sections.

Key Features

• Duratec SFB series carbon steel construction for both blade body and tooth material
• 14 TPI constant pitch with straight tooth form and raker tooth set
• Flexible back type supports consistent tracking on bandsaw wheels
• Contour cutting capable for curved and irregular profiles
• Compatible material applications include ferrous metal, non-ferrous metal, plastic, and plywood
• Welded blade supplied as a single unit ready for installation

Compatibility

Designed as a replacement or spare bandsaw blade for band saws that accept a 150-inch blade with a 0.25-inch width. Suitable for machines configured for contour cutting of ferrous metal, non-ferrous metal, plastic, and plywood stock.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician with the machine fully powered down and the blade guides retracted. Blade tension and tracking should be set according to the saw manufacturer specifications before resuming operation. Gloves are recommended when handling the blade due to exposed tooth edges. Inspect the weld joint for integrity before installing the blade on the machine.