Starrett 15105 Welded Bandsaw Blade 10 Tpi Carbon Steel

Product Description

The STARRETT 15105 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous cutting operations on stationary band saw equipment. It measures 12 feet 6 inches in length and 0.25 inches wide, with a blade thickness of 0.025 inches. The blade runs a constant 10 TPI pitch with a raker tooth set and straight tooth form, delivering consistent chip clearance across a range of material types. The flexible back type reduces fatigue stress during extended use. Installation and replacement are handled by metalworking technicians and industrial maintenance professionals.

The STARRETT 15105 is suited for contour cutting applications in light industrial and shop environments. The carbon steel construction and M42 material grade support cutting of ferrous metals, non-ferrous metals, plastics, and plywood. It fits standard band saw machines that accept 12-foot 6-inch blades at 0.25-inch width. The constant pitch pattern makes it a reliable choice for production cutting where consistent tooth geometry is required.

Key Features

• Duratec SFB series carbon steel blade with M42 material grade
• Constant 10 TPI pitch for consistent chip removal
• Raker tooth set with straight tooth form for general-purpose cutting
• Flexible back type for reduced blade fatigue during extended cuts
• Contour cutting capable across ferrous metals, non-ferrous metals, plastics, and plywood
• Welded construction for drop-in band saw replacement

Compatibility

Designed as a replacement welded bandsaw blade for stationary band saw machines accepting a 12-foot 6-inch blade length and 0.25-inch blade width. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as specified by the manufacturer.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician with the machine fully powered down and locked out per OSHA lockout/tagout procedures. Verify blade tension, tracking, and guide clearances according to the band saw manufacturer's service documentation before resuming operation. Wear cut-resistant gloves when handling the coiled blade. Inspect blade welds and set teeth before installation to confirm the blade is free of defects.