Starrett 15068 Welded Bandsaw Blade 14 Tpi Bi-metal

Product Description

The STARRETT 15068 is a welded bi-metal bandsaw blade engineered for continuous cutting of ferrous and non-ferrous metals. Measuring 65 inches in length and 0.5 inches wide with a blade thickness of 0.035 inches, it runs at 14 teeth per inch (TPI) in a constant pitch configuration. The cutting teeth are ground from M42 high speed steel and set in a raker pattern with a positive rake angle for aggressive, efficient stock removal. This blade is part of the Intenss series and is designed for professional metalworking applications where consistent cut quality and blade life are priorities. Licensed metalworkers and fabricators are the primary installers and users.

The STARRETT 15068 suits production and job-shop bandsaw operations cutting a broad range of ferrous metals such as steel and iron as well as non-ferrous materials including aluminum and brass. The contour-cutting capability makes it appropriate for curved cuts as well as straight crosscuts and ripping operations. Its flexible back type allows it to run on standard vertical bandsaw frames without undue stress at the weld joint. The constant pitch at 14 TPI targets medium-section metal stock where chip clearance and cut speed are balanced for general shop use.

Key Features

• Bi-metal construction with M42 high speed steel teeth for extended blade life on metal cutting
• 14 TPI constant pitch for consistent chip load on medium-section ferrous and non-ferrous stock
• Raker tooth set reduces cutting resistance and promotes efficient chip evacuation
• Positive rake angle improves cut aggression and reduces feed force requirements
• Flexible back type minimizes fatigue stress at the weld and along the blade body
• Contour-cutting capable for curved profiles in addition to straight cuts

Compatibility

Designed as a welded replacement bandsaw blade for vertical metal-cutting bandsaws that accept a 65-inch blade length and 0.5-inch blade width. Verify wheel diameter, blade guide clearance, and tension capacity on the saw before installation.

Installation Notes

Installation should be performed by a qualified metalworker or machine operator familiar with bandsaw blade changes. Disconnect and lock out power to the bandsaw before removing the old blade or fitting the new one. Ensure blade tension is set per the saw manufacturer's specification and that blade guides and thrust bearings are properly adjusted to the blade width before running. Do not exceed the blade speed rating of the saw or force feed material against the blade under initial break-in cuts.