Starrett 14755 Welded Bandsaw Blade 9 Ft 6 Tpi Carbon Steel

Product Description

The STARRETT 14755 is a welded bandsaw blade from the Duratec SFB series, designed for continuous-loop installation on stationary band saws used in metal fabrication, woodworking, and light manufacturing environments. The blade runs 9 feet in length and 3/4 inch wide, with a 0.032-inch thickness and a constant-pitch, 6-teeth-per-inch (TPI) configuration. Both the blade body and tooth material are carbon steel, giving the blade a flexible back type suitable for general contour cutting. The raker tooth set and straight tooth form make it well suited for steady feed rates through a range of workpiece materials. Installation is handled by maintenance technicians or experienced fabrication shop personnel.

The 14755 is appropriate for use on horizontal and vertical band saws in light industrial and shop settings. Its 6 TPI constant-pitch geometry works across ferrous metals, non-ferrous metals, plastics, and plywood, making it a versatile stock blade for general-purpose cutting. The flexible back construction allows the blade to track smoothly on standard two-wheel and three-wheel band saw configurations without excessive stress at the weld joint. The 9-foot loop length fits a range of mid-size stationary band saws commonly found in fabrication and maintenance shops.

Key Features

• 9-foot welded loop — ready for direct installation, no field welding required
• 6 TPI constant-pitch tooth pattern for consistent chip load across supported materials
• Raker tooth set with straight tooth form optimized for general contour cutting
• Carbon steel blade body and tooth material — Duratec SFB series flexible back construction
• Rated for ferrous metal, non-ferrous metal, plastic, and plywood applications
• 0.032-inch blade thickness and 3/4-inch width suit standard mid-size band saw wheel and guide configurations

Compatibility

Designed as a general-purpose replacement welded bandsaw blade for stationary band saws that accept a 9-foot loop with a 3/4-inch wide, 0.032-inch thick blade profile.

Installation Notes

Band saw blades should be installed by qualified maintenance or fabrication personnel with the machine fully de-energized and locked out per applicable OSHA lockout/tagout procedures before blade removal or installation. Verify wheel diameter, blade guide spacing, and throat depth against the saw manufacturer specifications before fitting the new blade. Tension and track the blade according to the band saw manufacturer guidelines before making any cuts. Inspect the weld joint for cracks or irregularities before initial use.