Starrett 14662 Welded Bandsaw Blade 19ft 6in 3 Tpi

Product Description

The STARRETT 14662 is a welded bandsaw blade from the Duratec SFB series, designed for continuous loop cutting on stationary band saws. The blade runs 19 feet 6 inches in length and 3/4 inch in width with a 0.032 inch thickness, making it a direct-fit replacement for machines requiring that loop size. At 3 TPI with a constant pitch and hook tooth form, it is suited for moderate feed-rate cuts through a range of materials. The raker tooth set and positive rake angle promote chip clearance and reduce heat buildup during prolonged cuts. Licensed contractors and shop technicians handling material fabrication work are the primary installers and users of this blade.

The 14662 is rated for cutting ferrous metal, non-ferrous metal, plastic, and plywood, making it a versatile blade for metal fabrication shops, millwork operations, and general trade use. The flexible back construction allows the blade to track consistently on standard two-wheel and three-wheel band saw frames sized for a 19 foot 6 inch loop. Constant pitch spacing delivers predictable cutting performance across varying stock thicknesses without tooth stripping on thinner workpieces.

Key Features

• 19 ft 6 in welded loop — ready to install without field brazing or welding
• 3 TPI constant pitch with hook tooth form for aggressive material removal
• Raker tooth set with positive rake angle promotes efficient chip evacuation
• Carbon steel blade and tooth construction throughout the full body
• Flexible back type maintains consistent tracking under continuous load
• Rated for contour cutting in ferrous metal, non-ferrous metal, plastic, and plywood

Compatibility

Designed for band saws requiring a 19 ft 6 in welded loop blade with a 3/4 in blade width. Confirmed material applications include ferrous metal, non-ferrous metal, plastic, and plywood.

Installation Notes

Blade installation should be performed by qualified shop technicians or tradespeople familiar with band saw tensioning and tracking procedures. Disconnect and lock out power to the band saw before handling or replacing the blade. Verify wheel diameter, blade width capacity, and tracking guide clearances on the machine before installing a new loop. Do not force a blade onto wheels or run the saw with guards removed.