Starrett 14627 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14627 is a welded bandsaw blade from the Duratec SFB series, designed for continuous cutting on stationary bandsaw machines. It measures 89.5 inches in length and 0.5 inches in width, with a blade thickness of 0.025 inches. The blade is constructed from carbon steel with a straight tooth form, raker tooth set, and a constant 14 TPI pitch pattern. The flexible back type allows the blade to run smoothly on standard bandsaw wheels. Licensed HVAC techs and machinists, metal fabricators, and shop maintenance personnel will find this blade well-suited for repetitive straight and contour cutting tasks.

This blade is intended for use on benchtop and floor-standing bandsaw machines in light industrial, maintenance, and fabrication shop environments. Its 14 TPI constant pitch makes it appropriate for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The contour cutting capability allows operators to follow curved cut lines on appropriate materials. It is a single-unit replacement blade sold individually.

Key Features

• Duratec SFB series carbon steel construction for both blade body and tooth material
• 14 TPI constant pitch for consistent chip load across supported materials
• Raker tooth set with straight tooth form for balanced cutting action
• Flexible back type rated for contour cutting applications
• Compatible material applications include ferrous metal, non-ferrous metal, plastic, and plywood
• Welded construction for continuous loop operation on standard bandsaw machines

Compatibility

Designed as a replacement welded bandsaw blade for stationary bandsaw machines accepting a 89.5-inch loop blade that is 0.5 inches wide and 0.025 inches thick.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician familiar with blade tensioning and tracking procedures. Disconnect and lock out power to the bandsaw before removing the existing blade or installing this blade. Verify wheel diameter and blade guide clearance match the blade width and thickness before tensioning. Follow the machine manufacturer's recommended tensioning specifications for blade width.