Starrett 14541 Welded Bandsaw Blade 14 Tpi Bi-metal M42

Product Description

The STARRETT 14541 is a welded bi-metal bandsaw blade engineered for continuous cutting of ferrous and non-ferrous metals in professional shop and trade environments. Measuring 64.5 inches in length and 0.5 inches wide with a 0.035-inch thickness, this blade runs at 14 teeth per inch with a constant pitch and raker tooth set. The M42 high speed steel tooth material delivers hardness retention at elevated cutting temperatures. The flexible back construction reduces fatigue cracking during tight-radius and contour cuts, making it a reliable consumable for metal fabrication and mechanical trades.

This blade is suited for horizontal and vertical band saw machines used in HVAC fabrication shops, plumbing fabrication, general mechanical contracting, and metal service environments. The 14 TPI constant pitch pattern is well-matched to medium-wall ferrous tubing, angle iron, flat bar, and non-ferrous stock such as aluminum and copper profiles. The Intenss series designation indicates a general-purpose industrial-grade specification appropriate for production cutting cycles. A licensed technician or journeyman machinist familiar with bandsaw setup and tensioning procedures is the typical installer.

Key Features

• Bi-metal construction with M42 high speed steel teeth for extended blade life on metal stock
• 14 TPI constant pitch delivers consistent chip load on medium-section ferrous and non-ferrous materials
• Raker tooth set and positive rake angle reduce cutting resistance and improve surface finish
• Flexible back type resists fatigue cracking during contour cutting operations
• Pre-welded loop eliminates field welding and ensures a consistent, balanced blade joint
• Straight tooth form simplifies chip evacuation on solid bar and tubing cuts

Compatibility

Designed as a direct-fit welded bandsaw blade replacement for horizontal and vertical band saw machines accepting a 64.5-inch loop blade that is 0.5 inches wide and 0.035 inches thick.

Installation Notes

Bandsaw blade replacement is typically performed by a machinist or qualified shop technician. Power down and lock out the saw at the disconnect before removing the worn blade or installing a new one. Confirm wheel guides, blade tension, and tracking are set to the saw manufacturer specifications before resuming cuts. Do not exceed the blade speed rating for the tooth material grade when cutting hardened or abrasive stock.