Starrett 14366 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14366 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting in professional shop and trade applications. The blade runs 12 feet long and 3/8 inch wide with a thickness of 0.025 inches, delivering consistent geometry from loop to loop. At 14 teeth per inch with a constant pitch and raker tooth set, it produces clean, controlled cuts in a range of materials. The straight tooth form and flexible back construction help the blade track accurately on standard bandsaw wheels. Licensed tradespeople and shop technicians install this blade for production and maintenance cutting tasks.

The 14366 is suited for ferrous metal, non-ferrous metal, plastic, and plywood. The constant 14 TPI pitch makes it a practical choice for general-purpose contour cutting where a single blade must handle varied workpieces. The raker tooth set clears chips efficiently, reducing heat buildup during longer cuts. Typical install environments include fabrication shops, mechanical rooms, and industrial maintenance facilities where bandsaw work spans multiple material types in a single shift.

Key Features

• 12-foot welded loop in Duratec SFB series carbon steel construction
• 14 TPI constant pitch for predictable, repeatable cut quality
• Raker tooth set promotes efficient chip clearance and reduced heat
• Straight tooth form with 0.025-inch blade thickness for stable tracking
• Flexible back type accommodates standard bandsaw wheel geometry
• Rated for ferrous metal, non-ferrous metal, plastic, and plywood

Compatibility

Designed as a direct-fit welded bandsaw blade for bandsaws accepting a 12-foot, 3/8-inch wide blade with standard wheel spacing.

Installation Notes

Bandsaw blade changes should be performed by a qualified technician with the machine fully powered down and locked out per OSHA lockout/tagout procedures. Verify wheel diameter and blade guide spacing match the 12-foot loop length before installation. Wear cut-resistant gloves when handling the coiled blade. After installation, track and tension the blade according to the bandsaw manufacturer specifications before making any cuts.