Starrett 14119 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14119 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous cutting in stationary bandsaw equipment. At 11 feet 6 inches long, 1 inch wide, and 0.035 inches thick, it carries a constant-pitch, 14 teeth-per-inch configuration with a straight tooth form and raker tooth set. The flexible back type reduces blade fatigue during contour and straight-line cuts. Licensed tradespeople and shop technicians working with metal fabrication, woodworking, or plastics cutting will find this blade suited to production and maintenance environments alike.

This blade is built for contour cutting applications across a range of materials including ferrous metal, non-ferrous metal, plastic, and plywood. The constant 14 TPI pitch delivers consistent chip load and surface finish on moderate cross-sections. It is well matched to vertical or horizontal bandsaws requiring an 11-foot 6-inch blade loop in industrial shop, maintenance facility, or fabrication environments. The raker tooth set helps clear chips efficiently during through-cuts on both metallic and non-metallic stock.

Key Features

• Duratec SFB series carbon steel construction for both blade body and teeth
• Constant-pitch 14 TPI for consistent chip load across varied material thicknesses
• Raker tooth set promotes efficient chip evacuation during metal and plastic cuts
• Straight tooth form and flexible back reduce blade stress and extend service life
• Supports contour cutting in ferrous metal, non-ferrous metal, plastic, and plywood
• Welded construction delivers a continuous loop ready to install without field joining

Compatibility

Designed as an OEM-style replacement or direct-fit blade for stationary bandsaws requiring an 11-foot 6-inch blade loop, 1 inch wide, with a 0.035-inch blade thickness.

Installation Notes

Blade installation and tensioning should be performed by a qualified technician with the bandsaw fully de-energized and locked out per applicable OSHA lockout/tagout procedures. Verify wheel diameter and blade guide spacing match the blade width and thickness before installation. Do not exceed the blade speed rating of the host saw for the material being cut. Proper blade tracking and tensioning should be confirmed before resuming cutting operations.