Starrett 14098 Welded Bandsaw Blade 6 Tpi Carbon Steel

Product Description

The STARRETT 14098 is a welded bandsaw blade from the Duratec SFB series, designed for continuous cutting in stationary band saw equipment used by metal fabricators, pipefitters, and general trade shops. The blade measures 14 feet 6 inches in length and 0.75 inches wide, with a blade thickness of 0.032 inches. It runs a constant 6 teeth per inch (TPI) straight tooth form with a raker tooth set, which balances chip clearance and cut quality across a range of material thicknesses. Both the blade body and tooth material are carbon steel, making this a cost-effective choice for high-frequency production cutting.

The STARRETT 14098 is suited for ferrous metal, non-ferrous metal, plastic, and plywood applications. The flexible back type allows the blade to absorb the stress of continuous band saw operation without premature fatigue cracking. The constant pitch pattern delivers consistent feed rates and predictable surface finishes, which matters in production environments where repeatability is required. This blade fits stationary band saws configured for a 14 foot 6 inch blade loop and is appropriate for both residential shop use and light commercial fabrication settings.

Key Features

• Duratec SFB series carbon steel blade with flexible back construction
• 6 TPI constant pitch for consistent cutting across varied material thicknesses
• Raker tooth set improves chip evacuation during cuts in ferrous and non-ferrous metals
• Straight tooth form and straight rake angle reduce cutting forces on the workpiece
• Contour cutting capable, supporting curved and irregular cut profiles
• Compatible with ferrous metal, non-ferrous metal, plastic, and plywood stock

Compatibility

Designed as a replacement or spare welded bandsaw blade for stationary band saws requiring a 14 foot 6 inch blade loop. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as specified by the manufacturer.

Installation Notes

Installation should be performed by a qualified technician familiar with band saw blade tensioning and tracking procedures. Disconnect and lock out power to the saw before removing the old blade or installing the new one. Verify that the blade guides, thrust bearings, and wheel tires are in good condition before tensioning the new blade. Follow the saw manufacturer's tension and tracking specifications to avoid premature blade fatigue or blade wander.