Starrett 14094 Welded Bandsaw Blade 6 Tpi Carbon Steel

Product Description

The STARRETT 14094 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on stationary band saw machines. At 10 feet 5 inches in length and 0.032 inches thick, this blade fits a wide range of shop and industrial band saws. It runs a 3/4-inch wide profile with 6 teeth per inch at constant pitch and a raker tooth set, delivering smooth, controlled cuts through a variety of materials. The straight tooth form and flexible back make it well suited for curves and contour work. Installation and use are handled by machinists, fabricators, and shop technicians.

The STARRETT 14094 is built for cutting ferrous metal, non-ferrous metal, plastic, and plywood. It is appropriate for both production shop environments and maintenance applications where versatile material removal is required. The constant pitch and raker set provide consistent chip clearance across the supported material range, reducing blade loading during extended cuts. The flexible back allows the blade to track smoothly around band saw wheels without stress cracking.

Key Features

• Duratec SFB series carbon steel construction for blade body and teeth
• 6 TPI constant pitch for consistent chip load and smooth cuts
• Raker tooth set with straight tooth form optimized for contour cutting
• Flexible back reduces fatigue and wheel stress during operation
• Cuts ferrous metal, non-ferrous metal, plastic, and plywood
• Welded blade — ready to install, no field joining required

Compatibility

Designed for use on band saw machines accepting a 10-foot 5-inch blade length with a 3/4-inch blade width. Confirm wheel-to-wheel throat dimension and blade guide clearance on the specific machine before installation.

Installation Notes

Band saw blade replacement should be performed by a qualified machinist or shop technician. Disconnect and lock out power to the machine before removing the old blade or installing the new one. Verify correct blade tension per the machine manufacturer's specification using the tensioning gauge on the saw. Blade guides and thrust bearings should be checked and adjusted after installation before resuming operation.