Starrett 14092 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14092 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for continuous cutting operations on metal and non-metal materials. The blade measures 8 feet 11 inches in length and 0.625 inches (5/8 inch) wide, with a thickness of 0.032 inches and a constant-pitch tooth configuration at 14 teeth per inch (TPI). The raker tooth set and straight tooth form deliver consistent chip clearance and controlled feed rates across a range of workpiece materials. Licensed HVAC, electrical, and plumbing professionals as well as fabrication shops typically keep blades like this in inventory for cutting conduit, pipe, and structural stock.

This blade is suited for contour cutting applications in both ferrous and non-ferrous metals, plastics, and plywood. The flexible back type allows the blade to track smoothly through radius cuts without premature fatigue cracking. At 14 TPI with a constant pitch, it performs best on medium-section stock where a fine, controlled cut is needed. Fabricators, pipe fitters, and sheet metal workers will find this blade a practical fit for production or service-call cutting tasks.

Key Features

• Duratec SFB series welded construction for a continuous, seam-joined loop
• 14 TPI constant pitch for consistent chip load and smooth cut finish
• Raker tooth set promotes efficient chip evacuation on solid stock
• Carbon steel blade and tooth material — rated for ferrous metal, non-ferrous metal, plastic, and plywood
• Flexible back type supports contour and radius cutting without premature blade fatigue
• Straight tooth rake angle provides stable, controlled cutting geometry

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for horizontal and vertical bandsaws accepting a 5/8-inch-wide blade with a loop length of 8 feet 11 inches.

Installation Notes

Blade installation should be performed by a qualified technician following the bandsaw manufacturer's tensioning and tracking procedures. Always power down and lock out the saw before removing or installing a blade. Wear cut-resistant gloves when handling the coiled or uncoiled blade. Verify blade length, width, and thickness compatibility with your saw's wheel diameter and blade guide specifications before mounting.