Starrett 14076 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14076 is a welded carbon steel bandsaw blade from the Duratec SFB series, designed for contour cutting on stationary band saw machines. It measures 10 feet in length and 1/2 inch in width, with a blade thickness of 0.025 inches and a constant-pitch tooth pattern at 14 teeth per inch. The straight tooth form combined with a raker tooth set delivers consistent chip clearance across a range of materials. The flexible back type allows the blade to run smoothly on standard two-wheel band saw configurations. Installation and replacement is handled by machine operators, maintenance technicians, and fabrication shop personnel.

The STARRETT 14076 is suited for cutting ferrous metal, non-ferrous metal, plastic, and plywood. The 14 TPI constant pitch makes it effective for medium-thickness stock where a balance of cut speed and surface finish is needed. The raker tooth set handles interrupted cuts and varied cross-sections without excessive vibration. This blade is a practical choice for general fabrication, light metalworking, and production cutting environments where consistent blade geometry is required across repeated cuts.

Key Features

• 10-foot welded loop length ready to mount on compatible band saw machines
• 14 TPI constant-pitch tooth pattern for consistent cut rate on medium-thickness stock
• Raker tooth set for effective chip clearance on ferrous and non-ferrous metals
• Carbon steel blade and tooth material rated for ferrous metal, non-ferrous metal, plastic, and plywood
• Flexible back type reduces fatigue cracking during continuous operation
• Straight tooth rake angle supports clean entry cuts with minimal burr on common shop materials

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for stationary two-wheel band saw machines accepting a 10-foot by 1/2-inch blade. Confirmed material applications include ferrous metal, non-ferrous metal, plastic, and plywood.

Installation Notes

Band saw blade replacement should be performed with the machine fully de-energized and the power disconnect locked out before opening blade guards. Wear cut-resistant gloves when handling the coiled blade. Verify blade tension and tracking per the saw manufacturer specifications before resuming operation. Blade changes on stationary band saws are typically performed by machine operators or maintenance technicians following standard shop safety procedures.