Starrett 14067 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14067 is a welded bandsaw blade from the Duratec SFB series, designed for continuous-loop cutting on vertical or horizontal band saws. The blade measures 89 inches long and 0.5 inches wide, with a 0.025-inch thickness and a constant-pitch 14 TPI tooth configuration. Tooth set is raker style with a straight rake angle and straight tooth form, ground from carbon steel on both the blade body and cutting edge. A flexible back type supports operation on variable-speed bandsaw units in shop and field environments. Licensed HVAC techs, plumbers, and general trade professionals use this blade for cutting ferrous metal, non-ferrous metal, plastic, and plywood in fabrication and service work.

The 14067 is suited for contour cutting applications where a consistent tooth pitch delivers predictable chip load across a range of materials. The 14 TPI count makes it a practical choice for thin-wall ferrous tubing, non-ferrous conduit, plastic pipe, and sheet stock. It fits standard consumer and professional-grade band saw frames that accept a 89-inch blade loop with a 0.5-inch blade width. Installers working in HVAC, plumbing, and electrical trades commonly use this blade for rough-in cutting of ductwork, pipe, and conduit.

Key Features

• Constant-pitch 14 TPI for consistent chip load across ferrous metal, non-ferrous metal, plastic, and plywood
• Raker tooth set with straight rake angle for balanced chip clearance
• Carbon steel blade body and tooth material for general-purpose shop cutting
• Flexible back type supports contour cutting and curved-path cuts
• Welded construction forms a continuous loop — no blade joining required at installation
• Duratec SFB series designation indicates standard flexible back geometry

Compatibility

Designed to fit band saw frames that accept an 89-inch blade loop with a 0.5-inch width and up to 0.025-inch blade thickness. Suitable for cutting ferrous metal, non-ferrous metal, plastic, and plywood as stated by the manufacturer.

Installation Notes

Band saw blade replacement should be performed by a qualified technician with the saw unplugged or locked out per OSHA lockout/tagout procedures before opening the blade guards. Verify wheel diameter, blade guide clearance, and blade tension specifications on the saw frame before installing. Weld integrity should be visually inspected prior to tensioning. Wear cut-resistant gloves when handling coiled or looped bandsaw blades.