Starrett 14044 Welded Bandsaw Blade 6 Tpi Carbon Steel

Product Description

The STARRETT 14044 is a welded bandsaw blade from the Duratec SFB series, designed for contour cutting applications across a range of materials. The blade measures 12 feet 6 inches in length and 0.375 inches (3/8 inch) in width, with a thickness of 0.025 inches. It runs at 6 teeth per inch with a constant pitch and a raker tooth set, providing consistent chip clearance during cuts. Both the blade body and tooth material are carbon steel with a flexible back, making it well suited for use on standard bandsaw equipment in trade and shop environments. Licensed tradespeople and experienced shop technicians are the primary installers and operators of this blade.

The STARRETT 14044 is intended for cutting ferrous metals, non-ferrous metals, plastic, and plywood. Its straight tooth form and raker set pattern make it a practical choice for general-purpose contour cutting where a constant pitch blade is appropriate. The flexible back construction allows the blade to track reliably on bandsaw wheels across a variety of cutting tasks in both production and maintenance shop settings.

Key Features

• Duratec SFB series construction with a flexible carbon steel back
• 6 TPI constant pitch for consistent, repeatable cutting performance
• Raker tooth set with straight tooth form for effective chip clearance
• Rated for ferrous metal, non-ferrous metal, plastic, and plywood applications
• Welded blade loop at 12 feet 6 inches eliminates blade-joining steps at installation
• 0.025 inch blade thickness suited for standard bandsaw wheel clearances

Compatibility

Designed as a replacement or spare welded bandsaw blade for bandsaws accepting a 12 foot 6 inch loop, 3/8 inch wide, 0.025 inch thick blade. Confirm wheel spacing, guide clearance, and blade tracking specifications on the host bandsaw before installation.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician following the bandsaw manufacturer's service procedures. Disconnect and lock out electrical power to the saw before removing or installing any blade. Verify blade tension, tracking alignment, and guide bearing clearance after installation before returning the saw to service. Wear cut-resistant gloves when handling the blade loop.