Starrett 14035 Welded Bandsaw Blade 14 Tpi Carbon Steel

Product Description

The STARRETT 14035 is a welded bandsaw blade from the Duratec SFB series, designed for continuous contour cutting in professional and light industrial environments. At 6 feet 8 inches long and 0.25 inches wide, it runs on standard benchtop and floor-standing band saws. The blade is constructed entirely of carbon steel — tooth and back — and runs 14 teeth per inch at a constant pitch with a raker tooth set and straight tooth form. The flexible back reduces blade fatigue during curved cuts. Licensed tradeworkers and shop professionals handling metal fabrication and material prep will find this blade a direct working-grade replacement.

This blade is suited for contour cutting in both residential shop and light commercial fabrication settings. Its material application range covers ferrous metal, non-ferrous metal, plastic, and plywood, making it a versatile stock blade for multi-material cutting stations. The 14 TPI constant pitch delivers a consistent, moderate finish cut appropriate for general-purpose material removal across those substrates. It ships as a single welded loop, ready to mount.

Key Features

• Duratec SFB series construction with all-carbon-steel blade and tooth material
• 14 TPI constant pitch for consistent cut finish across varied materials
• Raker tooth set with straight tooth form for balanced chip clearance
• Flexible back type reduces blade fatigue and extends service life during contour cuts
• Compatible with ferrous metal, non-ferrous metal, plastic, and plywood cutting applications
• Pre-welded loop — no field joining required

Compatibility

Designed for band saws accepting a 6-foot 8-inch welded blade loop at 0.25 inches wide and 0.025 inches thick. Suitable for contour cutting on ferrous metal, non-ferrous metal, plastic, and plywood as stated by the manufacturer.

Installation Notes

Band saw blade replacement should be performed by a qualified operator with the saw fully powered down and unplugged before opening the blade guard. Blade tension and tracking must be adjusted per the saw manufacturer's specifications after mounting. Wear cut-resistant gloves when handling the blade loop. Verify wheel diameter and blade clearance specifications on your saw before installing to confirm proper fit.