Starrett 14029 Band Saw Blade Coil 3/4 in 100 Ft 3 Tpi

Product Description

The STARRETT 14029 is a band saw blade coil stock designed for continuous cutting applications where custom blade lengths are required. Made from carbon steel with a flexible back, this coil stock allows shops and service technicians to cut blades to exact lengths for a wide range of band saw setups. The blade measures 0.75 inches wide and 0.032 inches thick, with a 3 teeth per inch (TPI) constant pitch and hook tooth form in a raker set configuration. The 100-foot coil length provides substantial yield for multiple blades per coil.

This coil stock is suited for metalworking, fabrication, and trade shop environments where band saw blades are replaced frequently or custom-sized to fit specific machines. The 3 TPI hook tooth configuration is well matched to cutting thicker stock and softer metals or structural materials. The flexible back allows the blade to run smoothly around band saw wheels without premature fatigue cracking. Contour cutting capability is supported by this blade geometry, making it appropriate for curved and straight cuts alike.

Key Features

• Carbon steel construction with a flexible back for extended blade life on standard band saw wheels
• 3 TPI constant pitch with hook tooth form for aggressive material removal on thick or soft stock
• Raker set tooth configuration for efficient chip clearance during continuous cuts
• 0.75 inch blade width supports stable tracking and contour cutting capability
• 0.032 inch blade thickness provides the correct kerf and flex balance for the specified width
• 100-foot coil length yields multiple custom-length blades per coil, reducing per-blade cost in high-volume shops

Compatibility

Designed as a coil stock replacement suitable for band saws that accept 0.75 inch wide blades with a 0.032 inch thickness profile. Confirm wheel diameter, blade guide clearance, and blade welder capacity before cutting and joining lengths from coil.

Installation Notes

Cutting and joining band saw blade coil stock should be performed by qualified shop technicians using a blade welder and appropriate grinding equipment. Power down and lock out the band saw before removing a worn blade or installing a new one. Ensure blade tension and tracking are set according to the band saw manufacturer specifications after installation. Wear appropriate cut-resistant gloves when handling coil stock, as the toothed edge presents a laceration hazard during uncoiling and cutting.