Starrett 14005 Welded Bandsaw Blade 5-8 Tpi Bi-metal

Product Description

The STARRETT 14005 is a welded bi-metal bandsaw blade engineered for continuous cutting of ferrous and non-ferrous metals. At 137 inches long and 3/4 inch wide with a 0.035 inch thickness, this blade is sized for mid-range horizontal and vertical bandsaws common in fabrication and maintenance shops. The variable pitch tooth pattern runs 5 to 8 TPI, reducing vibration and harmonics during cuts through varying cross-sections. The high speed steel M42 tooth tips are set in a raker pattern with a positive rake angle, delivering aggressive, efficient cutting with extended edge life. HVAC, plumbing, and electrical trades use blades of this type for cutting structural stock, pipe, and conduit during installation and service work.

This blade suits metal-cutting bandsaw applications in both residential and light commercial shop environments. It is designed for contour cutting and straight stock cutting of ferrous metal and non-ferrous metal. The Intenss series designation indicates a high-performance bi-metal construction intended for shops that cycle through cuts in mixed materials. The flexible back type allows the blade to handle continuous loop tension without fatigue cracking over typical service life. Installers working with conduit rack fabrication, structural steel, or copper and aluminum stock will find the variable pitch design beneficial for clean, chatter-free cuts across those materials.

Key Features

• Variable pitch 5 to 8 TPI reduces vibration and harmonic chatter during cuts
• M42 high speed steel teeth provide extended cutting life on ferrous and non-ferrous metals
• Raker tooth set with positive rake angle supports aggressive chip clearance
• Flexible back construction resists fatigue cracking under continuous bandsaw tension
• Welded loop design eliminates blade-end connectors for smooth, consistent tracking
• Bi-metal construction balances tooth hardness with back flexibility for long service intervals

Compatibility

Designed as an OEM-style replacement or upgrade blade for metal-cutting bandsaws accepting a 137 inch by 3/4 inch loop blade with 0.035 inch thickness.

Installation Notes

Bandsaw blade replacement should be performed by a qualified operator following the saw manufacturer's tensioning and tracking procedures. Disconnect and lock out power to the saw before opening blade guards or handling the blade. Wear cut-resistant gloves when coiling, uncoiling, or installing the blade. Verify blade tension with the saw's built-in gauge before resuming cuts, and confirm blade tracking is centered on the wheel crown before running under load.