Starrett 13961 Band Saw Blade Coil Stock 10 Tpi Bi-metal

Product Description

The STARRETT 13961 is a bi-metal band saw blade in coil stock form, designed for shops and service professionals who cut blades to custom lengths. The coil measures 100 feet long, 0.5 inches wide, and 0.035 inches thick. The cutting edge features high speed steel teeth at a constant 10-tooth-per-inch pitch with a raker set pattern and a straight rake angle, making it well-suited for general-purpose metal cutting applications. The alloy steel back provides the flexibility and fatigue resistance needed for continuous band saw operation. Fabricators, metalworking shops, and maintenance trades rely on coil stock like this to size blades to fit a wide range of band saw machines.

This coil stock is intended for use in horizontal and vertical band saw machines where the operator welds or clips blades on-site to a required length. The constant 10 TPI pitch is a practical choice for cutting solid bar stock, tubing, and structural shapes in mild steel and similar metals. The raker tooth set supports efficient chip clearance during straight cuts. Contour cutting capability is noted, making this suitable for radius work as well as straight cuts on appropriate material thicknesses.

Key Features

• Bi-metal construction: high speed steel teeth bonded to an alloy steel back for extended tooth life and blade flexibility
• 100-foot coil length allows custom blade sizing for multiple band saw formats
• Constant 10 TPI pitch delivers consistent chip load on solid sections and tubing
• Raker tooth set promotes chip clearance and reduces heat buildup during cuts
• Straight tooth form and straight rake angle support predictable, controlled cutting action
• Contour cutting capable for curved or radius profiles

Compatibility

Designed as a coil stock replacement for band saw machines that accept 0.5-inch-wide blades; blade must be cut and joined to the required loop length to match the specific machine specification.

Installation Notes

Blade cutting and welding from coil stock should be performed by qualified shop personnel using a blade welder rated for bi-metal stock. Disengage and lock out power to the band saw before installing or replacing any blade. Verify blade tension, tracking, and guide settings per the machine manufacturer's recommendations after installation. Inspect the weld joint for straightness and integrity before resuming operation.