Starrett 13853 Band Saw Blade Coil 6 Tpi 1/2 in 250 Ft

Product Description

The STARRETT 13853 is a carbon steel band saw blade in coil stock form, designed for continuous cutting operations where custom blade lengths are required. The coil measures 250 feet in length with a blade width of 1/2 inch and a blade thickness of 0.025 inches. With 6 teeth per inch (TPI) and a constant pitch pattern, this blade is suited for general-purpose contour cutting in wood, non-ferrous metals, and similar materials. The raker tooth set and straight tooth form produce consistent chip clearance during cuts. A flexible back construction allows the blade to run smoothly on band saw wheels without fatigue cracking during extended use. Licensed tradespeople and fabrication shops cut this coil stock to the exact lengths their machines require.

This coil stock is intended for use in commercial shops, fabrication facilities, and trade environments where multiple band saws of varying wheel diameters and throat depths require custom-length blades. The 6 TPI constant pitch configuration handles straight and contour cuts in workpieces of moderate cross-section. The flexible back design accommodates the continuous flexing cycle of band saw operation. Shops running production cutting benefit from purchasing coil stock rather than pre-welded loop blades, as it allows on-demand blade fabrication to any required length.

Key Features

• Carbon steel construction for general-purpose cutting applications
• 6 TPI constant pitch for consistent chip load and smooth cut finish
• Raker tooth set promotes efficient chip clearance and reduced heat buildup
• Flexible back resists fatigue cracking during continuous band saw operation
• Straight tooth rake angle and straight tooth form for standard cutting geometry
• 250-foot coil length allows cutting to custom blade loop lengths as needed

Compatibility

Designed as a general-purpose coil stock replacement for band saws accepting 1/2-inch wide blades with 0.025-inch thickness; verify wheel diameter, blade gullet clearance, and blade guide specifications on the target machine before cutting to length.

Installation Notes

Blade cutting and welding should be performed by a qualified technician using appropriate blade welder and grinder equipment. Power down and lockout the band saw before removing the existing blade or installing a new loop. Blade tension should be set according to the band saw manufacturer's specifications for 1/2-inch blade width. Confirm blade tracking and guide alignment before resuming cutting operations.