Starrett 13835 Band Saw Blade Coil 0.5 in 100 Ft 6 Tpi

Product Description

The STARRETT 13835 is a carbon steel band saw blade coil stock designed for continuous cutting applications in fabrication, metalworking, and general trade shop environments. The coil measures 100 feet in length with a blade width of 0.5 inches and a thickness of 0.025 inches. At 6 teeth per inch with a constant pitch and raker tooth set, this blade delivers consistent chip clearance and straight, controlled cuts. The flexible back construction allows the coil to feed smoothly through band saw guides without stress cracking during operation. It is typically cut to length on-site by machinists, fabricators, and maintenance technicians to fit a variety of horizontal and vertical band saw machines.

This coil stock is suited for production and job-shop environments where custom blade lengths are required. The toothed cutting edge with straight tooth form and straight rake angle performs reliably on contour cutting applications. Purchasing blade stock in coil form allows shops to size blades precisely to their machines and minimize downtime associated with stocking multiple pre-cut blade lengths. The raker set pattern alternates tooth offsets to clear material efficiently during the cut.

Key Features

• Carbon steel construction provides adequate hardness for general-purpose band saw cutting
• 0.5 inch blade width supports both straight and contour cutting applications
• 6 TPI constant pitch delivers consistent tooth engagement and chip clearance
• Raker tooth set clears chips from the kerf efficiently during continuous cuts
• Flexible back resists fatigue and cracking when coiled and during normal saw operation
• 100-foot coil length allows on-site blade sizing to fit a wide range of band saw machines

Compatibility

Designed as a coil stock replacement for band saw machines that accept 0.5 inch wide blades with a 0.025 inch blade thickness. Cut to length and welded or joined to fit specific machine wheel diameters and throat depths.

Installation Notes

Blade coil stock should be cut and welded or mechanically joined by a qualified technician using appropriate blade welding equipment. Power down and lock out the band saw before removing the old blade or installing a new one. Verify blade tension and tracking per the saw manufacturer specifications before resuming operation. Wear cut-resistant gloves when handling uncoiled blade stock.